MILLING MACHINE
A router is machine tool used for machining by chip removal througt the movement of a rotary tool cutting edges of several so-called strawberry. In tradicional routers, the piece moves closer areas to be machined into the tool, can benefit many forms, from flat surfaces to more complex.
POLISHER
working with an abrasive that etches the material of the workpiece. Typically used for precision finishing the possibility of very precise control of abrasion. Usually no mechanical pressure is exerted on the workpiece.
HYDRAULIC PRESS
The hydraulic press is a machine that is based on the principle of Pascal to transmit a force. Taking advantage of the pressure is the same, a small force over an area equivalent to girl is a large force over an area too large in proportion equal.
SAW
The saw is a tool used for cutting wood or other materials. It consists of a blade whith serrated edge and is operated by hand or by other sources of energy such as steam, water or electricity. Acording to the material used to cut different types of saw blades..
LATHE
The lathe is a machine tool for machining parts by removing material revolution in the form of chips by a cutting tool. This will be suitable for the material to be machined can be made of carbon steel, high speed steel, aluminum, copper, ceramics, diamond, etc.
It would be good to say in few words what each machine does.
ReplyDeleteI wrote a comment and now I see. What happened?.
ReplyDeleteI asked them what they were for these instruments, and I do not know about the profession.
(Viviana Alzate)
explain to because the most common tool you put is the saw blade?
ReplyDeletemaybe because it is very important?
(mauricio mejia)
How does a milling machine work?
ReplyDelete(Andres Echeverri)
Why did you choose this topic?
ReplyDelete(Esteban Hurtado)
Viviana and the blog is a short description about each machine tool if you have more questions we can re-write.
ReplyDeleteAndres, basically the router works many revolutions, therefore, the workpiece must be firmly attached to the bank or work release. The cutter path should be continuous and without pause.
ReplyDeleteEsteban, chose this topic because we both like the management of machine tools, starting with Guillermo studied mechanical engineering and Richard worked with these machines.
ReplyDeleteI would like to know how the machines can be expensive and if they are easy to get
ReplyDelete( laura gaviria )
Hi Laura, the machines, we agree they are expensive, but keep in mind that these machines in the manufacturing industry are widely used and has a high level of production, in other words are necessary for the industry, therefore these elements are practically pay for themselves, for the simple fact that they need and has a very high level of production.
ReplyDelete(Guille)
guille thanks for your answer he had not seen from that point of view and you're right
ReplyDelete(laura gaviria)